IXEG737 1.07更新通知
HotFix Update 1.0.7 is here!
Hello XXXXXXXX
X-Aviation and IXEG are pleased to provide you a free update to version 1.0.7 of the IXEG 737 Classic!
Typically we don't make a habit of doing updates like this back to back, but due to an accidental transmission of slightly out of date files from the IXEG team to X-Aviation we are having to issue this "emergency" 1.0.7 HotFix. We do apologize for any inconvenience!
Just like with our previous update, we will use the HotFix upgrade system here. Rather than going and re-downloading an entire aircraft package, or having to go through a full re-install process, we will be offering more immediate code changes through this delivery method. In short, it's quick, easy, and kind of fun! Please read below how to install this update!
Version 1.0.6 was released yesterday and was pretty important. 1.0.7 retains everything 1.0.6 had in it, so no need to obtain 1.0.6 if you didn't previously apply the HotFix ID for it!
But first, here's what's in it...
Version 1.0.7 introduces the following fixes:
Fix to "climb page soft crash"
Fix to some DCT points disappearing on RTE page
Fix to VNAV profiles going over the mach switchover altitude, where you would get UNABLE cruise message
To upgrade your aircraft to version 1.0.7 please follow the below steps:
Open X-Plane and the 737 Classic as your aircraft
In the X-Plane menu bar at top, select Plugins > Gizmo64 > Windows > HotFix
You will be asked to enter in your HotFix ID. Copy and paste in the following: xxxxxxxxxxxxxxx
Click 'Update'
Once it has downloaded and installed, click 'Reboot' and you'll be done!
Thank you for all of your support!
Blue Skies,
X-Aviation
Copyright © 2016 X-Aviation, All rights reserved.
You are receiving this e-mail as a customer to this product
感谢分享，来的真快:( 要不要这样啊:Q 才看到1.06一会儿，又1.07了。。。:lol 更新速速真快快 谢谢楼主分享消息！ Thanks for that, very useful. 不敢再升级了，这是对入正的管用吧！像我们只有保证1.06不花屏就不错了 xiandingyi 发表于 2016-6-26 16:48
不敢再升级了，这是对入正的管用吧！像我们只有保证1.06不花屏就不错了
我1.0.5能用 1.0.7也能用 为什么1.0.6用不了 屏幕黑的 现在D版也有1.0.7了 跟新速度太快啦 yzmxncbv 发表于 2016-6-26 09:22
谢谢楼主分享消息！
解决就好！:lol:) shenren 发表于 2016-6-27 16:04
233333333333333333333333333333333333333333333
请不要灌水好吗 谢谢分享 所以大家更新1.07時GIZMO都沒跳錯誤
最近幾次更新後GIZMO常常跳錯誤 已入正，希望制作组更新能把这架飞机更新的越来越真实
页:
[1]